Hersteller: TOMEI

TOMEI "ARMS MX7960" TURBO KIT Mitsubishi EVO 7/8/9

Art.Nr.: 173017

Hersteller: TOMEI

1.889,00 EUR
incl. 19 % USt

  • Lieferzeit 2 Wochen
  • Lieferzeit 2 Wochen 2 Wochen


Zu diesem Artikel existieren noch keine Bewertungen

Produktbeschreibung

 
TOMEI ARMS MX7960 TURBO KIT Mitsubishi EVO 4-9 4G63
  • 100% Bolt On
  • Rated for 450 HP+
  • Tomei Quality
  • ohne TÜV-Zulassung!

M7960 Turbine Kit

  • Designed for low to mid range torque
  • Better response compared to M8270
  • Max boost at 4,000 RPM
  • Best suited for street tuned cars, and drift cars.

APPLICATION: EVO4~9
KIT CONTENTS: TURBO, WATERLINE, OIL RETURN LINE, GASKETS, BOLTS

 
 
 

The stock turbo for the EVO 4-9 series was already an improvement from the previous models. Since the turbo design is now reversed there has not been any bolt on turbos made readily available on the market until now. Our all new ARMS M7960 turbo greatly exceeds all performance aspects over the stock unit and delivers the most power and torque gains possible on a direct bolt on replacement turbo. With the design aspects of this ARMS turbo it is a good all round balance for various engine setups through all power ranges.

 

FEATURES

 

Flat Primary Exhaust Pressure.

The boost build up is neither sluggish nor abrupt; we have designed this to be natural and smooth. This characteristic provides a stress free driving experience with easy vehicle operation.
 

Response Equal to Stock Trim

Generally, a larger turbocharger relative to stock, results in decreased response of the engine. However, we have managed to keep the response equal to that of the stock trim by matching the most ideal turbine and compressor wheel. Countless hours of testing was of course performed to achieve these results.
 

Increased Peak Power

To achieve an increased peak power with the various restrictions such as the turbo size limit is considered a great achievement. We are also proud of the perfectly instant response where there is no lag and no abrupt boost pressures.
 

Maintains Boost Pressure at High RPMs

It is evident that the stock turbocharger cannot maintain or extend boost pressure above 5,500 RPMs. The M7760 has the capacity to far extend this limit, making it an ideal step for further advanced tuning.
 
 
TYPE
COMPRESSOR WHEEL
COMPRESSOR HOUSING
TURBINE WHEEL
TRIM
ENTRANCE DIA. (mm)
OUTER DIA. (mm)
ENTRANCE DIA. (mm)
EXIT DIA. (mm)
TRIM
OUTER DIA. (mm)
EXIT DIA. (mm)
ARMS
M7960
60
52.50
68.0
53.50
50.00
79
61.00
54.00


The ARMS M7960 is capable of 400PS with 1.6k of boost.
The stock engine is safe for 360-370PS due to the weak Conrods. So with the standard engine it is best to use 1.4~1.5K of boost







 

Bewertungen

* Den Zusatz “Verifizierter Kauf” erhalten nur Bewertungen, die von Käufern abgegeben wurden, die das Produkt in diesem Shop gekauft haben. mehr