Produktbeschreibung
GSC Power-Division Mitsubishi Evolution 9 Mivec S1 Camshafts Nockenwellen Set 268°/268°
SC Power-Division billet S1 cams for the Mitsubishi Evo 9 are designed for those with a stock turbo all the way to a GT30/50 trim.
These cams will not sacrifice any bottom end loss over stock cams; nothing but gains, and will promote faster spooling of the upgraded turbos.
Gains of 25-40 WHP (depending on turbo) have been seen by simply bolting the S1 cams in. GSC Power Division Mivec S1 Camshafts
Designed for a rev range of 3000-8000 RPMs
These cams work well on the stock valve springs
300-450 WHP camshaft
Made 100% in the USA
**If using aftermarket cam gears (especially AEM) check the bolt length. Some cam gears are too thick for the OEM bolt on the billet cams, a 40mm underhead length bolt may be necessary in this case** GSC Power Division Mivec S1 Camshafts
Designed for a rev range of 3000-8000 RPMs
These cams work well on the stock valve springs
300-450 WHP camshaft
Made 100% in the USA
**If using aftermarket cam gears (especially AEM) check the bolt length. Some cam gears are too thick for the OEM bolt on the billet cams, a 40mm underhead length bolt may be necessary in this case** GSC Power Division Mivec S1 Camshafts
7009S1 ADV Duration Duration @ 0.040" Peak Lift Center Line
Intake 268° 216° 11.00mm 128°
Exhaust 268° 220° 10.50mm 113°
Intake 268° 216° 11.00mm 128°
Exhaust 268° 220° 10.50mm 113°
Bewertungen
* Den Zusatz “Verifizierter Kauf” erhalten nur Bewertungen, die von Käufern abgegeben wurden, die das Produkt in diesem Shop gekauft haben. mehr
